Where to Buy Smart Film

Where to Buy Smart Film

Switchable smart film is a specialized product — you will not find genuine PDLC or SPD film at a local hardware store. Buying from the right source means getting verified optical specifications, a proper warranty, and technical support for installation. Here is what to evaluate and how to buy from elevatoX.

What to Look for in a Smart Film Supplier

• Published optical specs: A legitimate supplier publishes VLT, haze, IR rejection, and switching speed for each model. If specs are "available on request" without a technical reason, that is a red flag.
• Test standards: Ask whether performance data is measured to recognized standards (GB18910.5-2008 for lifespan, IEC or ASTM for optical parameters). elevatoX tests to GB18910.5-2008 with independently verified cycle counts.
• Warranty: PDLC film should carry at least a 12-month warranty covering manufacturing defects and performance degradation. elevatoX provides a standard 12-month warranty with optional 24- or 36-month extensions.
• Installation support: The supplier should offer installation guidance, approved sealant recommendations, and transformer sizing rules. Without this, even good film will fail from improper installation.
• Transformer matching: The supplier must provide or recommend correctly sized transformers. An undersized transformer causes slow switching, flickering, and overheating.

Pricing Factors

Smart film pricing depends on several variables:

• Film type and model: Higher-performance models (EL-X2-PRO with 92.2% VLT, 1.13% haze) cost more per square meter than entry models (EL-L2 with 84.2% VLT).
• Format: Sheet film (pre-cut to size) is more expensive per m² than roll film (buyer-side cutting and electrode processing). Roll film is ideal for high-volume processing operations.
• Width: Wider film (up to 1,800 mm for sheet, 1,820 mm for roll) may command a premium for custom widths.
• Quantity: Volume orders reduce per-unit cost significantly.
• Accessories: Transformers, controllers, smart-home bridges, and sealant add to the total project cost.
• Shipping: Film ships flat or rolled depending on format and destination. International shipping costs vary by volume and speed.

As a reference range, standard PDLC smart film with controller typically falls between $80–200 per square meter depending on model, format, and order volume. Request a project-specific quote for accurate pricing.

elevatoX Product Range

elevatoX manufactures five PDLC self-adhesive film models and SPD dynamic tint film:

• EL-L2: Entry model, 84.2% VLT, 2.58% haze, 1,500 mm width, 60V AC.
• EL-L2-PRO: Mid-range, 84.5% VLT, 2.36% haze, 1,650 mm width, 54V AC, 165° viewing angle.
• EL-X1: High-brightness, 88.2% VLT, 1.81% haze, 1,500 mm width, 48–60V AC.
• EL-X2-A: Top-tier clarity, 90.4% VLT, 1.47% haze, 1,500 mm width.
• EL-X2-PRO: Flagship, 92.2% VLT, 1.13% haze, 1,650 mm width, 48V AC, 165° viewing angle.
• SPD Dynamic Tint Film: Continuous dimming, ≥60% VLT ON / ≤2% VLT OFF, 90V AC, 30:1 dimming range.

All models operate at about 3.7 W/m² (PDLC) or 3 W/m² ON / 0 W OFF (SPD), with lifespans exceeding 100,000 hours and 200 million switching cycles.

How to Request a Quote from elevatoX

1. Measure your glass: Record the width and height of each pane in millimeters.
2. Choose your model: Review the specifications page to compare optical and electrical parameters.
3. Plan your control: Decide between wall switch, remote, Wi-Fi panel, or smart-home integration. Use the wiring simulator to map transformer sizing.
4. Submit the quote form: Go to elevatoX quote page and enter your glass sizes, model preference, application type, and control method.

FAQ

Can I buy smart film on Amazon or Alibaba? Some generic switchable film is available on marketplace platforms, but quality varies widely. Without verified optical specs and proper warranty terms, you risk buying film that delaminates, fails to switch uniformly, or has no manufacturer support.

What is the minimum order quantity? elevatoX ships single sheets for sample evaluation. Production orders have no strict minimum, but volume pricing applies above 50 m².

Do you ship internationally? Yes. elevatoX ships worldwide from Chengdu, China. Lead times and shipping costs depend on order volume and destination.

How long does delivery take? Sample sheets typically ship within 3–5 business days. Production orders take 7–15 business days depending on volume and customization.

Take the Next Step

Compare models on the PDLC film product page, review full specifications, plan your wiring with the wiring simulator, and request a quote with your project details.